Open 24 hours, every day 832-484-9595
  1. Home
  2. Guides
  3. Air conditioning

How often to change your AC filter in Houston

By Topnotch Air Systems, Texas HVAC license TACLB00084529E
Updated November 2026

The short answer In Houston, check a one-inch filter every month and expect to replace it every one to two months in summer. Buy MERV 8, or MERV 11 if someone has allergies. Higher is not better: a filter that is too dense starves the system of air.

Time
2 minutes
You’ll need
The right size filter
Cost
The price of a filter

The package says “up to 90 days.” That figure assumes a system that runs a few hours a day. In a Houston summer yours runs most of the day, pulling far more air, dust and pollen through the same filter.

How often to change it

Your house1-inch filter4-inch media filter
No pets, no allergiesEvery 2 months in summer, every 3 in winterEvery 6 to 9 months
One petEvery 6 weeksEvery 6 months
Several pets, or allergiesEvery monthEvery 4 to 6 months
Construction or remodeling nearbyCheck every 2 weeksCheck monthly
New-build home, first yearEvery monthCheck monthly

Whatever the schedule, the light test wins: hold the filter up to a light. If you cannot see light through it, replace it.

Which MERV rating

RatingCatchesGood for
MERV 1 to 4Lint and large dust. The thin blue fiberglass kind.Protecting the equipment and little else.
MERV 8Dust, pollen, mold sporesMost homes. The sensible default.
MERV 11The above plus pet dander and finer dustHomes with pets or allergies.
MERV 13Smoke and some bacteria-sized particlesOnly systems built for it. In a one-inch slot it restricts airflow badly.

A one-inch MERV 13 filter is an easy way to pay extra for an airflow problem. If you need that level of filtration, ask about a four-inch media cabinet, which filters as well with far less restriction.

  1. Find it

    Usually behind the large return grille in a hallway ceiling or wall, or in a slot at the indoor unit. Some homes have more than one return, each with its own filter.

  2. Read the size

    It is printed on the edge of the old filter, for example 20x25x1. Take a photo of it so you have it at the store.

  3. Mind the arrow

    The arrow on the filter frame points the way the air flows: toward the indoor unit, or into the ceiling or wall for a return grille.

  4. Seat it flat

    No gaps around the edge. Air takes the easy path, and a filter that does not fit lets dust straight past.

  5. Write the date on it

    On the frame, in marker. It ends the guessing.

What a clogged filter costs you

  • Longer run times and a higher electric bill.
  • A coil that freezes over.
  • Dust on the indoor coil, which needs a technician to clean.
  • In winter, a furnace that overheats and shuts its burners off.

Questions people ask us

Are washable filters worth it?

They work if you actually wash and fully dry them every month. Most filter less well than a MERV 8 pleated filter, and one put back damp grows mold.

Can I run the system without a filter for a day?

A day will not ruin it, but do not make a habit of it. Everything the filter would have caught lands on the wet indoor coil and sticks.

Why does my filter get dirty so fast?

Pets, a dusty attic leaking into the return duct, nearby construction, or a fan left on On all day. A filter that turns grey in two weeks is worth a look at the return ductwork.

Filter’s fresh and it still struggles? Call us.

832-484-9595