Open 24 hours, every day 832-484-9595
  1. Home
  2. Guides
  3. Costs and decisions

How old is my AC? Reading the serial number

By Topnotch Air Systems, Texas HVAC license TACLB00084529E
Updated November 2026

The short answer The manufacture date is on the data plate, a metal label on the outdoor unit. Many plates print it plainly as a manufacture date. If yours does not, the date is coded into the first few characters of the serial number, and each brand does it differently.

Time
5 minutes
You’ll need
A phone camera
Cost
Nothing
  1. Find the data plate

    On the outdoor unit, usually on the back or the side facing the house. It lists the model number, serial number, refrigerant and electrical ratings.

  2. Take a photo

    Plates fade in the sun and sit in awkward places. A photo you can zoom in on is easier than reading it on your knees.

  3. Look for a plain date first

    Many units print “MFR DATE”, “Date of manufacture” or a month and year near the top of the plate. If you find one, you are done.

  4. Otherwise, decode the serial number

    Use the table below for your brand.

  5. Check the indoor unit too

    The furnace or air handler has its own plate, and the two halves are not always the same age. One may have been replaced without the other.

Serial numbers, brand by brand

BrandWhere the date isExample
Carrier, Bryant, PayneFirst four digits: week, then year3209E12345 is week 32 of 2009
Trane, American StandardSince 2010, the first two digits are the year. From 2002 to 2009, the first digit is the year.14213ABC is 2014. 5123ABC is 2005.
Goodman, AmanaFirst four digits: year, then month1507123456 is July 2015
LennoxThird and fourth characters are the year. The fifth, a letter, is the month.5811C12345 is March 2011
Rheem, RuudThe four digits after the letter: week, then yearW231412345 is week 23 of 2014
York, Coleman, LuxaireSecond and fourth characters are the year. The third, a letter, is the month.W1E7123456 is May 2017

Month letters start at A for January. Brands skip different letters, usually I, so if a late-year date looks odd, check it against the rest of the plate.

These are the formats in use for most systems still running. Manufacturers have changed them over the decades, and some private-label brands follow their parent company’s scheme. If the result makes no sense, send us a photo of the plate and we will read it for you.

What the age tells you

AgeWhat it means
Under 5 yearsLikely still under the manufacturer’s parts warranty. Check before paying for a part.
5 to 10 yearsMid-life. Repairs almost always make sense. The parts warranty may still apply if the system was registered.
10 to 15 yearsThe age when many Houston systems need their first large repair. Weigh each one. See repair or replace.
Over 15 yearsRunning on borrowed time in this climate, though plenty still work. Start budgeting.
Built before 2010Probably uses R-22 refrigerant. See what that means.

Questions people ask us

Is the age of the house the age of the AC?

Only if nobody has replaced it. In a house more than about fifteen years old, the system is often on its second outdoor unit.

Does the warranty start from the manufacture date?

Usually from the installation date, if the installer registered it. Without registration, many manufacturers fall back to a shorter term counted from manufacture. Keep your paperwork.

Why does age matter if it still works?

It changes how much is sensible to spend on a repair, and it tells you which refrigerant and efficiency era the system belongs to. Try the repair or replace calculator.

Can’t read the plate? Text us a photo.

832-484-9595